• Vimeo
  • Twitter
  • Linkedin
  • Facebook

  • About Us
  • Services
    • New Build Supervision
    • System Testing
    • Refit and Repairs
    • Technical Support
    • Pre-Purchase Surveys
    • New Build Constructions
  • Experiences
  • News
  • Contacts

Archive for year: 2013

You are here: Home » 2013

22 meters Jongert boat

September 20, 2013
September 20, 2013

A new interesting refit we have done in the spring of 2013 is on a sailing boat, the JONGERT of 22 meters built in the 80′s by the famous Dutch shipyards. A marinae boat, very good for making ocean crossings, built entirely of reinforced steel with aluminum shaft. The boat was presenting thinning and corrosion of plating and it was therefore necessary to partially replace it. We proceeded with an analysis of the thickness of the sheet metal of the hull and the subsequent mapping of areas detected at low values.
Most of the areas of corrosion corresponded to the leveling cement present in the bilges and the areas concerned to the replacement of the plate corresponded to areas fully furnished.

We then proceeded in this way :
Removed all the machinery in the engine room,
Removed all either metallic or wooden planking.
Removed all the furnishings at the waterline, from the zone of the owner and crew cabins in the bow.
In the meantime it was dismantled the existing teak deck to proceed to sandblasting and priming of the steel deck.
Tracked zones of replacement of the sheet, we then proceeded to cut the plating corroded and related structures concerned.
After having welded the new sheet and make any necessary X-rays relative at the view for the RINA expert, we started blasting all the inner sheets of the plating cycle and applied suitable bilge. Similarly, the hull was completely sandblasted and applied a great cycle hull with two coats of antifouling.
We started the installation of all machinery in the engine room and the new construction of all plumbing and installation of the furniture removed.
On deck the work continued in the grouting of the bridge and sticking the new teak deck pre- assembled in carpentry .
After the tires of the comments of the bridge all the rigs on the deck were refitted, rails, eyebolts, stanchions etc. .
Every fan coils were replaced, refrigerators compressors and kitchen were fully rebuilt.
This activity was quite complex and lasted from March to June 2013.

vista-esterna
sentine01
sentina02

sentine03
sentina04
Sentina05

profonda-corrosione
materiale-corrosivo
cassa-gasolio

corrosione3
corrosione2
Sentina-zona-bow-thruster

esterno01
interno02
interno01

interno03
interno07
interno06

interno08
ponte
prua

Sala-macchine
macchine01
macchine02

macchine03

0 Comments/in News

La Spina, vintage yacht.

September 2, 2013
September 2, 2013

Luckily I had the chance to take a survey on the famous vintage yachts “La Spina” built in 1929 in the prestigious shipyard Baglietto in Varazze, an historic gem unique in the world! “La Spina” is the first yacht of 12 meters international tonnage built in Italy, which was awarded by the Italian Sailing Federation with the “vela number 1″. Only fifty years later the “vela number 2″ was assigned to “Azzurra”.

This is not a simple boat. It is a significant piece of the history of the Italian yachting . The launch of La Spina in 1929, was not only a bold and challenging sports project up to that times almost exclusively of British, American and Scandinavian firms, but also posed a challenge and a cultural evolution of a social class looking for a place in the complex process of nation-building. The races between 12 meters are not only prestigious sporting events, but also important social gatherings attended by members of various royal houses. So it was that the Marquis Spinola, Admiral of the Royal Navy, entrusted the shipyard Baglietto in Varazze the burden and honor to make the first 12 meters of international tonnage ever built in the Mediterranean sea. The specifications imposed by the tonnage limits blend with the needs of the owner, not willing to sacrifice the habitability and comfort of the interior, combining fashion and glamor to sporting passion. The result is a speedboat with the qualities of a boat cruise, where impeccable and refined interior accommodations are combined with a very fine hull lines. The extreme flexibility of this vessel, the result of the vision of the owner, has allowed over the years to put aside the “racer” soul for the benefit issue of “cruiser”, becoming a yacht on which found place many personality of international society such the Prince of Piemonte Umberto of Savoy.

After several changes of ownership at the end of the twentieth century was pulled dry and abandoned on the Spanish coast, at the mercy of the weather, suffered a sharp decline. In 2005 a careful restoration work was taken by the most skilled shipwrights. The intent is to recover the boat both structurally then philologically, bringing the sailing back to 12 m. S.I.
The restoration work was completed in 2008, nearly eighty years after its construction, La Spina is then enrolled to the Italian vintage yacht, receiving the new certificate of international tonnage. It ‘amazing how all the missing details have been rebuilt so then the first impression when getting on board is to be in another time, a blast from the past.

eibhdaae
gfejihfh
iiidcgja
gjgffibd


0 Comments/in News

Works

  • MV 13 BagliettoAugust 2, 2015 - 2:27 pm
  • February 20, 2014 - 11:36 am
  • September 26, 2013 - 10:19 am
  • February 2, 2012 - 9:56 am

Archives

  • August 2015
  • February 2014
  • September 2013
  • October 2012
  • July 2012

Latest

  • 11755289_1666637726889583_6519921404693401513_nMV 13 BagliettoAugust 2, 2015 - 2:30 pm
  • azzAZIMUT YACHTFebruary 28, 2014 - 8:52 pm
  • vitruvius1Vitruvius®February 20, 2014 - 11:35 am
  • esterno0122 meters Jongert boatSeptember 20, 2013 - 10:47 am
  • eibhdaaeLa Spina, vintage yacht.September 2, 2013 - 1:13 pm

Tags

azipod bimini fb80 la spina naval surveys shipyards speedboat surveys vintage vitrivius yacht yacht survey

Infos

  • Useful Links
  • News from SYW
  • Our email

Services

  • New Build Constructions
  • New Build Supervision
  • Pre-Purchase Surveys
  • Refit and Repairs
  • System Testing
  • Technical Support

Partners

wosa Eclectic Design grafica web
Mille Services Life Picture Art
© BIANCHI MARINE SERVICES - Yacht Surveys | Naval Consulting - Vat: IT01403310111 - Italy | Ph: +39 348 3887990 | Web site by Eclectic Design